Manufacturer: Milton Roy Europe
Mechanically operated motorized diaphragm metering pump
Series: MRE GA
Max. delivery: 170 ℓ/h
Min. delivery: 17 ℓ/h
Max. pressure: 3.5 bar
Max. suction pressure: 2 bar
Control: Contact and 4-20 mA
Stroke number: 144 strokes/minute
Max. suction lift: 4 mvo
Dosing accuracy: ±2% (for 10-100% stroke length)
Connection size:
Material of parts in contact with liquid:
- dosing head: PVDF
- ball: Ceramic
- membrane: PTFE
- valve seat: PTFE
- valve sleeve: PVDF
- seal: -
- connection: PVDF/PVC
Liquid characteristics:
- max. temperature: 40 °C
- max viscosity: 50 cP
Motor data:
- voltage: 230/400 V
- phase number: 3
- performance: 120 W
- RPM: 3000 rpm
- frequency: 50 Hz
Protection: IP55
The motor is powered by a single-phase frequency converter (Varipulse). We recommend a 10A, D-type miniature circuit breaker for protection.
Operation:
- Stops the pump motor at each stroke between 0-20% power
- Continuously varies motor speed between 20-100%
Display: LCD
Power supply: 230 V AC, 50/60 Hz
Protection: IP55
Control signal (3 ways)
1., manual operation
2., automatic operation, based on an analog signal (0-10 mV or 4-20 mA),
3., automatic, proportional operation, based on an external pulse signal (e.g. water meter), the motor controller calculates the divisor/multiplier values ​​based on the specified pump type and water meter data
Selectable water flow: 1.5/2.5/3.5/5/10/15/25/40/60 and 100 m3/h
Water meter pulse signal: 0.25/0.5/1/ and 10 liters/pulse
Current input impedance: 500 Ohm
Voltage input impedance: 100 kOhm
Error message:
- remote signal voltage-free contact (1A, 250V)
Input option:
low level switch that disables the pump: order number 4360371002N
Ambient temperature: -20…+40°C
Test and documentation:
- Hungarian manual
- English manual, CE, spare parts list,
- 100% delivery performance and tightness check certificate