Manufacturer: Milton Roy Europe
Series: LMI PD
Electromagnetically driven diaphragm metering pump
For high viscosity liquids
Max. delivery: 4.2 ℓ/h @ 2 bar
Max. pressure: 10.3 bar @ 3 ℓ/h
Control: Contact signal
- the stroke rate can be set manually 0.8-160 strokes/min (range 200:1)
- the stroke rate can also be controlled from an external contact signal (adjustable concentration), in two ways:
- selectable stroke rate for 1 incoming pulse 1-999
- Selectable dosing volume for 1 incoming pulse 0.01-126ml (no accumulation)
- remote on/off
- two-level level switch reception (1st yellow signal, pump is working, 2nd red signal, pump stops)
Stroke volume: 0.394 mℓ
Diaphragm size code: 0.8
Stroke number: 0.8 – 160 strokes/minute
Max. suction lift: inflow recommended
Dosage accuracy: ±3%
Material of parts in contact with liquid:
- dispenser head: Acrylic
- ball: 316 S.S.
- membrane: Fluorofilm®
- fittings: PP
- valve seat: PTFE
- gasket: PTFE
Max. ambient temperature: 50 °C
Min. ambient temperature: -10˚C
Liquid characteristics:
- max. temperature: 50 °C
- max. viscosity: 1,500 cP for Newtonian fluids – 30,000 cP for polymers/thixotropic fluids
Power consumption: 50W @ 230VAC
Power: 110-240 VAC 50-60Hz
Supplied with CEE 7/7 plug
Supplied accessories:
- injector and check valve
- 1/2” NPT suction connection
- 3 m PE hose 0.5”
- 2 m reinforced PVC hose 15x23 mm
- 2 m 5-core control cable (48414)
Documentation:
- manual
- CE certificate
